01
Inner Tube
Oil-resistant NBR synthetic rubber
Smooth bore for stable hydraulic flow. Compatible with petroleum-based hydraulic oils, fuel oil, lubricants, emulsions, glycol/water-glycol solutions and water.
RX Series
Hydraulic
Hoses.
Built to the applicable EN and SAE specifications — not an approximation of them. What is on the label is what is in the hose.
One hose. Three engineered layers.
Engineered as one complete system.
02
StahlCore
Reinforcement system
High-tensile steel-wire reinforcement — controlled wire grade, winding geometry and layer tension. Calculated helix angles on spiral hoses; balanced, evenly tensioned layers on braided hoses.
03
SchützCover
Outer-layer protection system
Oil- and weather-resistant synthetic rubber cover, formulated and monitored for resistance to abrasion, ozone, UV exposure and environmental stress.
RX Series hose range
SAE 100 R1AT / EN 853 1SN
RX-100
Single Wire Braid Hydraulic Hose
- Working PressureUp to 25 MPa
- Bore Range3/16″ – 2″ · 11 sizes
- Temperature−40°C to +100°C
SAE 100 R2AT / EN 853 2SN
RX-200
Double Wire Braid Hydraulic Hose
- Working PressureUp to 41.5 MPa
- Bore Range3/16″ – 2″ · 11 sizes
- Temperature−40°C to +100°C
EN 856 4SP
RX-400
Four Spiral Hydraulic Hose
- Working PressureUp to 44.5 MPa
- Bore Range3/8″ – 2″ · 8 sizes
- Temperature−40°C to +120°C
EN 856 4SH
RX-400H
Heavy Duty Four Spiral Hydraulic Hose
- Working PressureUp to 42 MPa
- Bore Range3/4″ – 2″ · 5 sizes
- Temperature−40°C to +100°C
-
Impulse Tested
Repeated pressure loading verifies reinforcement integrity and fitting retention.
-
Burst Verified
Specifications tested to minimum burst pressure — 4× rated working pressure.
-
Proof Checked
Assemblies held at pressure to confirm leak-free construction.
-
StrengeTest
Verified through defined test protocols before leaving the facility.